principle of projection in engineering drawing

principle of projection in engineering drawing

Engineering drawing is language of engineering .Designers record and convey their ideas by means of engineering drawing . Engineers describe the structure or machine parts with the help of drawing .Engineering drawing is graphic language
 Engineering drawing another method of describing a machine .As compared to verbal or written description this method is brief and more clear .Ordinarily the idea conveyed by the word drawing is a pictorial view in which a machine is represented as the eyes see it .A pictorial view shows only the outside appearance of machine.


Principle of projection

If straight lines are drawn from various points on the contour of an object to meet a plane the object is said to be projected on that plane. The figure formed by joining in correct sequence the points at which these lines meet the plane is called a projection of that object. The lines from the object to the plane are called projector and the plane on which the projectors meet is known as the plane of projection.


 Methods of projection:

 In engineering drawing following four methods of projection are commonly used, they are:

(1) Orthographic projection

(2) Isometric projection

(31 Oblique projection

(41 Perspective projection.

In the above methods [2). [3] and (4) represent the object by a pictorial view '3 8Yes see it. In these mgthods of projectiqn a three dimensional object is represented on a projection plane by one view only. While in the orthographic projection an object is represented by two or three views on the mutual perpendicular proiection planes. Each projection view represents two dimensions of an object. For the complete description of the three dimensional object at least two or three views are required.

Orthographic projection:

 When the projectors are parallel to each other and also perpendicular to the proiection plane. the projection is called an orthographic projection. 


Step 1: Imagine that a person looks at an object (fig. 1-1) from a theoretically infinite distance. so that the rays of sight from his eyes are parallel to one another and perpendicular to the front surface (shown shaded).

Step 2: If these rays are extended further to meet. perpendicularly. a vertical plane [marked VP.) set up behind the object.

Step 3: The points at which they meet the plane are ioined in proper sequence. the resulting figure (marked E ) will be the projection of the object. It will be exactly similar to the view obtained by the person and will show the front surface of the obieét in its true shape and size. The lines from the object to the plane are the projectors. As the projectors are perpendicular to the plane on which the projection is obtained. this projection is known as an orthographic projection. It is shown separately in fig. 1-2. It can be seen that parallel edges of the object are shown by parallel lines, right angles remain as such and the semi-circle also remains a semi-circle. But the figure shows only two dimensions of the object. namely. thr width W and the height H. It does not show the depth the distance from the front to the back. Thus. we find that the projection from the front only is not sufficient for wmplete description of the object.
                 


                                                   

Let us further assume that a horizontal plane (marked HP.) is hinged to the vertical plane so that. the object is in front of the VP. and above the HP. (fig. 1-3)The projection on this plane. obtained in a similar manner. is shown by the figure marked P. If a person looks at the object from above. the view of the top surface (shown shaded) of the object will be exactly the same as the figure P. This figure shows the width W and the depth 0 ol the object. It does not show the height H. This projection on the horizontal plane is known as a top view or plan.

One of the planes may now be rotated or turned around so that it lies in exteneiorI with the other plane. This can be done in two ways: (ii by turning the VP. in the direction of the arrows A or (ii) by turning the HP. in the direction of the arrow B. The HP. when turned and brought in line with the V.P. is shown by dashed linet’w Generally second way of rotation is preferable. The two projections can now be show"




From the above discussion of the orthographic projection following important conclusions can be drawn:

(i) There are three important elements of this projection system, namely (a) an object (b) plane of projection (c) an observer. ‘

(ii) The obiect is assumed to be observed from the infinite distance so that. the rays of sight are parallel to each other. The lines representing these rays of sight are known as projectors.

(iii) Observe that the planes of the object which are parallel to the plane of projection are seen as true shape and true size.

(iv) Observe that the cylindrical portion whose axis is perpendicular to the projection plane (V.P.] and parallel to the H.P.. the projection on the VP. is the semi-circle and true-shape. while on the HP. it is observed as rectangle.

(v) Observe that the plane of object which is inclined to the VP. and perpendicular to the H.P.. its projection on the VP. will be apparent shape.

                                             

                                                DIFFERENCE BETWEEN 
FIRST-ANGLE PROJECTION METHOD AND THIHD-ANGLE PROJECTION METHOD 

,                 First-angle projection                                            Third angle projection                     

.1 The object Is kept' In the first               .             1 The object is assumed to be kept in the I
     quadrant.                                                                               third quadrant.

2. The object lies between the observer and ‘        2 The plane of projection lies between the                    the plane of projection.                                          observer and the object

3. The plane of proiection is assumed to be            3 The plane of projection is assumed to be                   non-transparent. ’                                                               transparent.

4. In this method. when the views are drawn          4  In this method. when the views are                          in their relative positions. the plan comes               drawn in their relative positions.the                          below the elevation. the view of the object             plan . comes above the elevation.                              as observed from the left-side is drawn ‘                 left hand side view is drawn to the                                to the right of elevation.                                     left hand side of the  elevation.
.                                                     
5. This method of projection is now                         5  This method of projection is used in USA.              recommended by "Bureau of Indian                         and other countries.
    Standard from 1991                                               

15 comments:

  1. It's the way you get that genuine film involvement with your home theater. Home theater projector costs have dove lately, and the size of the units have contracted right alongside the costs. movie projector screen

    ReplyDelete
  2. I am attracted by the presentation of this article. This information about engineering drawing, is really good. I really appreciate your work. It is a gainful article for us. Keep posting. Thank you.
    architectural draftsman melbourne

    ReplyDelete
  3. This is excellent information which is shared by you. This information is meaningful and magnificent for us to increase our knowledge about it. Keep sharing this kind of information. Thank you. Read more info about Engineering consulting

    ReplyDelete
  4. I generally want the quality substance, and this thing I found in your post. I'm truly thankful to you for this post.keep sharing this in future. Precast Structural Consultants

    ReplyDelete
  5. I am truly impressed by the details which you have provided regarding engineering design control services houston tx. It is an interesting article for me as well as for others. Thanks for sharing such articles here.

    ReplyDelete
  6. On the off chance that the Government has analyzed and supported any Rfi's, this will be remembered for the data set data and extra variations and clarifications will epitomize field Ecp's, shop drawings and change orders. pintores en zaragoza

    ReplyDelete
  7. An outstanding concept for your home is to utilize stucco as your surface. It rates high in outside house painting commercial painters New Orleans ideas, because of its convenience of maintenance and also affordable costs, in addition to its functional life expectancy. Repainting your stucco finish is an exceptional means of altering the shade or concealing those unsightly discolorations of your exterior surfaces. Industrial structures frequently utilize concrete blocks as a result of their capability to be varnished or painted, and also their capability for accomplishing numerous decorative results. The outside block is likewise typically used with a low maintenance surface and the shade can last a very long time.

    ReplyDelete
  8. Since we've set up that, we as a whole realize that a few of us can draw better compared to other people. pintor en zaragoza

    ReplyDelete
  9. Adjustments, notes and drawings will be formed with as-fabricated drawings and this will portray the genuine assembled structure, which keeps breaks from emerging with the general development.pintor en zaragoza

    ReplyDelete
  10. Drawing is a Skill-This implies that drawing isn't a few otherworldly action that certain individuals are brought into the world with the capacity to do. An ability is something that can be educated and above all scholarly. To draw, draw better, or draw as an expert you can. Brisbane Painting Pros

    ReplyDelete
  11. purchase yt views YouTube has a tremendous amount of traffic, which is why it's important that you start to use it as a source for customers. We'll explain how to get started on YouTube so your business doesn't miss the boat!

    ReplyDelete
  12. A skill is something that can be taught and most importantly-learned. If you want to draw, draw better, or draw as a professional- you can. Anyone can become skilled at drawing. Don't ever say, "I can't draw." Foto zeichnen lassen

    ReplyDelete

  13. A best handyman dubai is actually a qualified that may be used for a selection of small residence fixes, typically for maintenance, repairs and installations. The project of a handyman is commonly requested by those people who are not able to full a specific residence process. Handymen may provide their products and services to any individual, but the majority of handymen are utilized by housing complexes and companies. The price of a handyman is going to be determined by their expertise, as well as the provider they provide.

    ReplyDelete
  14. At the point when the lawyer understood that the spouse had spent the cash and the lawyer charge grant wouldn't be quickly gathered, he started to request cash from the client.
    Motorcycle Accident Attorneys

    ReplyDelete

Thank you for the comment